Banner
Home Forums Movie Theaters The Booth cooling measures
Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC: cooling measures

cooling measures 30 Dec 2001 13:02 #21130

What are some measures that can be undertaken to cool the gate, trap, xenon, etc.?

You're going to badly need a heat filter for a 7000 watt xenon on 35mm projection, right?

Andy

Enjoy The Show!

Andrew McCrea
Grand Cameo
Since 1987
The administrator has disabled public write access.

Re: cooling measures 30 Dec 2001 22:29 #21131

  • John Pytlak
  • John Pytlak's Avatar
  • OFFLINE
  • Platinum Boarder
  • Posts: 891
  • Karma: 0
I wrote several articles about how to prevent heat damage to prints:
http://www.kodak.com/country/US/en/motion/newsletters/reel/fall97/pytlak.shtml
http://www.kodak.com/country/US/en/motion/newsletters/reel/winter97/projection.shtml

John P. Pytlak, Senior Technical Specialist
Worldwide Technical Services
Entertainment Imaging
Research Labs, Building 69, Room 7525A
Eastman Kodak Company
Rochester, NY 14650-1922
Telephone: 716-477-5325 Cell: 716-781-4036 Fax: 716-722-7243
E-Mail: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Website: http://www.kodak.com/go/motion
John P. Pytlak, Senior Technical Specialist
Customer Technical Services
Entertainment Imaging
Research Labs, Building 69, Room 7525A
Eastman Kodak Company
Rochester, NY 14650-1922
Telephone: +1 585-477-5325 Fax: +1 585-722-7243
E-Mail: This e-mail address is being protected from spambots. You need JavaScript enabled to view it
Website: http://www.kodak.com/go/motion
The administrator has disabled public write access.
  • Page:
  • 1
Time to create page: 0.163 seconds
attraction attraction
attraction
attraction
attraction
attraction